Middle-East
Menu
Account
TRM702A - Binary 2 inputs device flush mounted battery powered KNX RF
Image TRM702A of the product Hager | Hager
Image TRM702A of the product Hager | Hager
Image TRM702A of the product Hager | Hager
TRM702A - Binary 2 inputs device flush mounted battery powered KNX RF
Image TRM702A of the product Hager | Hager
Image TRM702A of the product Hager | Hager
Image TRM702A of the product Hager | Hager

Binary 2 inputs device flush mounted battery powered KNX RF TRM702A

EAN-Nr.
3250615989024
Packaging
1 Prt.

Technical characteristics

Architecture
  • Bus system
    Without
  • Fixing mode
    flush-mounting
Functions
  • Bus module detachable
    No
  • ETS additional functions
    ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
  • Function
    reset function (to factory setting) ; easy additional functions: +6 scenes, on/off operating mode, 1 up/down button control
  • Quicklink functions
    quicklink functions: switching, dimming, blind, 2 scenes, switching time, NO contact push-button, priority, up/down push-button
Configuration
  • Pre-assembled
    confectioned, with 4-core cable
  • Number of modules
    0
Controls and indicators
  • Indicator lamp
    yes
  • Control
    Activation, for example through switches, push-buttons, timers, blind timer switches, magnetic contact
  • Button / push-button
    with configuration button
Connectivity
  • Radio protocol
    KNX Radio
  • Receiver category
    2
  • Binary inputs
    with 2 independent binary inputs for potential-free contacts
  • Inputs
    with 2 independent, battery-supplied binary inputs for potential-free contacts
Voltage
  • Type of voltage input 1
    DC
  • Input voltage
    3 V
Electric current
  • Number of entry circuits
    2
  • Input signal current
    33 µA
  • Intensity by input
    1 mA
Dimensions
  • Depth of installed product
    11 mm
  • Height of installed product
    39 mm
  • Width of installed product
    41 mm
Frequency
  • Radio transmission frequency
    868.3 MHz
Length
  • Max distance to switches
    10 mm
Power
  • Radio transmission power
    < 25 mW
Network configuration
  • Network
    not dependent on mains power
Measurement
  • Input scanning voltage
    per channel 5 V
Battery
  • Battery service life [years]
    ≈ 5
  • Battery / storage battery
    with lithium coin cell battery 3 V type: CR 2430
Materials
  • Colour independent of design lines
    light grey
  • Surface appearance
    matt
LED control
  • LED
    with configuration LED
Installation, mounting
  • Installation mode
    for installation behind flush-mounted inserts
Connection
  • Connection cross-sect. flexible conductor
    0,5 / 1,5mm²
  • Connection cross-sect. rigid cable
    0,5 / 1,5mm²
  • Connection to
    push-button / switch
  • Bus connection
    integration in the KNX radio/TP gateway, surface-mounted, into the KNX TP system
Cable
  • Line length
    20 cm
Settings
  • Programming
    toolless quicklink configuration using buttons and LED display
Equipment
  • Number of radio channels
    2
  • Number of quicklink links
    max. 20 transmitter/receiver
Use
  • Pulse time
    min. 50 ms
Standards
  • General standards
    EN 300220-2 ; EN 301489-3 ; EN 50491-3 ; EN 60950-1
Safety
  • REACH conform
    No
  • RoHS conform
    Yes
  • Halogen free
    No
Use conditions
  • Operating temperature
    -10…50 °C
  • Storage/transport temperature
    -20…70 °C
  • Energy-saving
    low intrinsic energy requirement
  • Relative humidity (without condensation)
    0…65 %
Identification
  • Application, usage
    KNX radio- sensors
  • Device family
    TRM
  • Main design line
    KNX radio/quicklink

Downloads

More documentation