![](https://hager.com/middle-east/products/static/version1721311119/frontend/Hager/deep-de/en_GB/images/loader-2.gif)
Alarm contact for motor starter 2C MZ527N
EAN-Nr.
3250614565120
Packaging
1 piece
Login to create a product list
You need to be logged into your myHager account to create product lists
Technical characteristics
Architecture
-
Maximum poles of the main device3
Configuration
-
Number of modules0.5
Main electrical features
-
Rated operational voltage Ue220 / 500 V
-
Type of supply voltageAC
-
Frequency40/60 Hz
Voltage
-
Rated insulation voltage690 V
-
Rated impulse withstand voltage6000 V
-
Rated operational voltage in DC24 / 220 V
Electric current
-
Acceptable current rating with AC13 A
-
Simulation fault currentNo
-
Maximum current25 A
-
Rated current1 A
-
Imin = f (U = 230 V AC)3 A
-
Imin = f (U = 230 V DC)0.25 A
-
Imin=f(U=400V AC) for power circuit2 A
-
Imin=f(U=24V DC) for power circuit2 A
Dimensions
-
Depth of installed product68 mm
-
Width of installed product9 mm
Power
-
Total power loss under IN0.2 W
-
Power loss per pole at In0.1 W
Endurance
-
Electric endurance in number of cycles5000
-
Number of mechanical operations10000
Installation, mounting
-
Tightening torque1,3Nm
-
Factory fittedNo
Connection
-
Connection cross-sect. flexible conductor2,5mm²
-
Connection cross-sect. rigid cable2,5mm²
-
Type of contacts2NO
-
Type of connectionwith screw
Accessories included
-
Type of accessoryfault-signal contact
Equipment
-
Number of auxiliary contacts as normally closed contact0
-
Number of auxiliary contacts as normally open contact2
-
Number of auxiliary contacts as change-over contact0
-
Quantity of NC contacts0
-
Quantity of NO contacts2
-
Quantity of INV contacts0
-
Number of auxiliary contacts as fault signal2
Standards
-
European directive WEEEconcerned
Safety
-
Protection index IPIP20
Use conditions
-
Operating temperature-25…55 °C
-
Degree of pollution according to IEC 60664 / IEC 60947-23
-
Altitude2000 m
-
Air humidity protection95% / 80°C
-
Storage/transport temperature-25…80 °C
Downloads
More documentation