JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.

KNX System (via ETS)

Fancoil 2 outputs 10A normally open, hand status 75312012

EAN-Nr.

4011334306498

Packaging

1 piece

The product is unfortunately no longer available.

Technical characteristics
Documentations
More products

Download the sheet

Technical characteristics

Bus system

KNX

Fan convectors

for converting RTR control variables into valve positions, fan stages ; 4 manual operation buttons for controlling fan stages and bus function on/off ; for the electric activation of fan convectors ; activation of 1 or 2 fan channels with 6 or 3 fan stages ; manual activation of blow fans using push-buttons or the operating panel
Multi-phase mode

suitable to switch different external conductors
Operating mode

Operating modes heating, cooling or heating and cooling

Channels

use of free channels to control switching loads
Number of modules

4

Operation

manual operation also possible without bus, e.g. on building site
Button / push-button

with programming button and red programming LED

Frequency

50/60 Hz

Auxiliary voltage

230 V AC
Operating voltage over bus

21…32 V DC
System supply voltage

30V DC via bus

Depth

70 mm
Assembling height as from DIN rail

63 mm
Width of rail mounted device (RMD)

4 modules
Height

90 mm
Width

72 mm

Fluorescent lamps duo circuit

2300 W
Power consumption, KNX

max. 150 mW
Conventional transformers

1200 VA
Electronic transformers

1500 W

Colour independent of design lines

light grey
RAL colour

RAL 7035 - Light grey

- uncompensated

1000 W

Fluorescent lamps parallel compensated

1160 W

LED

with 8 red status LEDs and 3 red LEDs as manual actuation indication

230 V incandescent lamps

2300 W
230 V halogen lamps

2300 W

Mounting type

din-Rail

Connection cross-sect. flexible conductor

0,75 / 4mm²
Connection cross-sect. rigid cable

1,5 / 4mm²
Conductor cross-section (flexible)

0.5…4 mm²
Type of connection to the bus

TG008 connector
Bus coupling unit

with integral bus coupling unit
Type of connection

with screw terminals
Bus connection

bus connection via connecting terminal

Supported configuration modes

system

REACH conform

Yes
RoHS conform

Yes

Operating temperature

-5…45 °C
Storage/transport temperature

-25…70 °C (storage at > 45°C reduces the service life)

Main design line

KNX

Information text

Comply with the fan convector manufacturer's instructions.

Downloads

More documentation