Middle-East
Menu
Account
TRM693G - Module 1 flush mounted output 3A 230V + 2 inputs mains powered, KNX radio
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager
TRM693G - Module 1 flush mounted output 3A 230V + 2 inputs mains powered, KNX radio
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager
Image TRM693G of the product Hager | Hager

Module 1 flush mounted output 3A 230V + 2 inputs mains powered, KNX radio TRM693G

EAN-Nr.
3250615988805
Packaging
1 piece

Technical characteristics

Functions
  • ETS additional functions
    ETS additional functions: +6 scenes, operating mode on/off, 1 up/down button control, push-button, 2 x alarm, status display
  • Quicklink functions
    quicklink functions: switching, 2 scenes, time switching, NO contact push-button, forced control
Configuration
  • Number of modules
    0
Controls and indicators
  • Indicator lamp
    yes
Connectivity
  • Radio protocol
    KNX Radio
  • Receiver category
    2
Electric current
  • Number of entry circuits
    2
  • Input signal current
    33 µA
  • Maximum through current
    3 A
  • Withstand current in AC1 for the contact path or zone 1
    3 A
Dimensions
  • Height of installed product
    40 mm
  • Dimensions (LLxwwxhh)
    40x40x20
  • Diameter
    53 mm
  • Height
    20 mm
Frequency
  • Transmission frequency
    868 MHz
  • Radio reception frequency
    868.3 MHz
Power
  • Total power loss under IN
    450 mW
  • Power dissipation per coil
    150 mW
  • Output power
    690 W
  • Conventional transformers
    250 VA
  • Electronic transformers
    250 VA
  • Radio transmission power
    < 10 mW
Materials
  • Colour independent of design lines
    light grey
  • Surface appearance
    matt
Lighting control
  • Fluorescent lamps with electronical ballast (EB)
    150 W
Fluorescent bulbs control
  • Power lighting fluo lamps
    150W
  • Max. power fluo. duo lamp comp. series
    150W
  • Compact fluorescent lamps
    150 W
  • Compact fluorescent lamps
    150 W
LED control
  • Max number of LED/CFL lamps
    20
  • Power LED
    150 W
Incandescent bulbs control
  • Max. power with incandescent lamps
    500 W
  • 230 V incandescent lamps and halogen lamps
    500 W
Installation, mounting
  • Installation mode
    for installation behind flush-mounted inserts
Connection
  • Conductor cross-section (flexible)
    0.5…1.5 mm²
  • Conductor cross-section (rigid)
    0.5…2.5 mm²
  • Type of contacts
    1NO
  • Type of connection
    with screw-in lift terminals
Cable
  • Binary cable length, extendable to
    max. 5 m
  • Binary cable length
    ≈ 20 cm
Settings
  • Supported configuration modes
    system, PB
Scope of delivery
  • Bus connection included
    Yes
Equipment
  • Number of outputs
    1
  • Number of radio channels
    2
  • Number of quicklink links
    max. 20 transmitter/receiver
  • Modular expandability
    No
  • Transmitter duty cycle
    1 %
Use
  • Pulse time
    min. 50 ms
Safety
  • REACH conform
    No
  • RoHS conform
    Yes
  • Halogen free
    No
Use conditions
  • Operating temperature
    -10…50 °C
  • Storage/transport temperature
    -20…70 °C
  • Relative humidity (without condensation)
    0…65 % (without condensation)

Downloads

More documentation