DIMMER 1 CHANNEL 300W NE TXA661A

EAN
3250616048720
Packaging
1 Piece

Technical properties

Architecture
  • Bus system
    KNX
  • Fixing mode
    REG
Functions
  • Multi-phase mode
    suitable to switch different external conductors
  • Soft startup
    bulb-preserving soft startup
Configuration
  • Number of modules
    4
Controls and indicators
  • Indicator lamp
    yes
  • Operation
    manual operation also possible without bus, e.g. on building site
  • Manual selection switches / push-buttons
    selection switch for manual/bus operation as well as load setting
Main electrical features
  • Frequency
    50/60 Hz
  • Rated current
    4 mA
Voltage
  • Auxiliary voltage
    230 V AC
  • Input voltage
    230 V AC
  • Operating voltage over bus
    21…32 V DC
  • System supply voltage
    30V DC via bus
Electric current
  • Bus current consumption (data transfer)
    < 2.3 mA
Fuse
  • Fuse
    short-circuit and overload proof (electronic fuse), overheating protection (display using LEDs)
Dimensions
  • Width of rail mounted device (RMD)
    4 modules
Power
  • Dimmable conventional transformers
    300 VA
  • Incandescent bulb power
    300 W
  • Total power loss under IN
    320 mW
  • Power dissipation per coil
    180 mW
  • Power of the variator
    300 W
  • Electronic transformers
    300 W
Materials
  • Colour
    light grey
Fluorescent bulbs control
  • Quantity energy-saving lamps
    per channel max. 8
  • Dimmable energy-saving lamps
    60 W
  • Power lighting fluo lamps
    60W
LED control
  • Quantity of dimmable, 230 V retrofit LED lamps
    per channel max. 8
  • Max number of LED/CFL lamps
    8
  • Dimmable LED lamps
    60 W
  • Power LED
    60 W
Incandescent bulbs control
  • 230 V incandescent lamps and halogen lamps
    300 W
Connection
  • Type of load
    universal
  • Conductor cross-section (flexible)
    0.75…2.5 mm²
  • Conductor cross-section (rigid)
    0.75…2.5 mm²
  • Bus coupling unit
    with integral bus coupling unit
  • Bus connection
    bus connection via connecting terminal
Settings
  • Supported configuration modes
    system
Scope of delivery
  • Bus connection included
    Yes
Equipment
  • Number of outputs
    1
  • Type of dimmer
    dimming actuator
  • Substation input
    No
  • Power boost suitable
    No
  • Modular expandability
    No
  • Dimming principle
    phase cut-on or cut-off according to load type, self-learning
  • low noise
    very low noise
Use
  • Local operation/hand operation
    Yes
Safety
  • Protection index IP
    IP20
  • REACH conform
    No
  • RoHS conform
    Yes
  • Halogen free
    No
Use conditions
  • Operating temperature
    -5…45 °C
  • Storage/transport temperature
    -20…70 °C
Identification
  • Main design line
    KNX

Downloads

More documentation